トップイメージ
ProductsInternational DistributorSpecial DistributorRent CarJAPANESE
BuyCompany InfoContact usmotor sportsLinksCHINESE
alpha16v
T.M.WORKS IGNITE VSD ALPHA 16V
イグナイトVSD アルファ 16v

専用ハーネスセット品番表

開発コンセプト

BOOST UP the ignition input voltage to the ignition coil from 12V to 16V!!!
Experience the enhanced torque during HIGH RPM range.
Subaru Impreza GDB Power Check Data
We received good feedback from Super Taikyu race drivers after installing our products.

Ignite VSD alpha 16V boosts up the ignition input voltage from 12V to 16V and provides stable voltage supply to the ignition coils.
This will also prevent ignition energy loss when heavy electrical equipment is in used.
Our Ignite VSD alpha 16V are made with heat resistance material and a power relay that is made in Japan is built-in the circuit board to provide a stable power supply.
Our Ignite VSD alpha 16V is RoHS compliant. RoHS is also known as Directive 2002/95/EC, originated in European Union and restricts the use of specific hazardous materials found in electrical and electronic products.
Therefore, it is suitable to be used in various countries around the world.  

 
Ignite alpha16〇 Increase high RPM torque
〇 Prevent high RPM misfiring (especially for high boost turbocharged engines)
〇 Prevent ignition energy loss when air conditioner is turned ON and also when heavy
 electrical equipment such as high power audio system is used
〇 Suitable for motorsports racing and daily use
〇 With a protection function that will not affect the function of the latest direct ignition
  coils
〇 Fail-safe design; will automatically return back to 12V if the Ignite VSD alpha 16V
  malfunction or if the LED does not lit up
〇 It will automatically remains at 12V for example when the battery condition is not very
  healthy or during engine cold start. But once the battery reaches the optimum charging
  voltage, Ignite VSD alpha 16V will then switch to its optimum 16V power supply to the
  ignition coils
〇 With the power relay built-in the circuit board of the Ignite VSD alpha 16V, we can ensure a
  100% performance from it
 

Retail Price : Ignite VSD alpha 16V module
¥26,000 (excl. tax)


To convert the old version of Ignite VSD alpha 16V to use the current version of harness,
a conversion harness CI004 (sold separately) is needed.

ci004
Part Number : CI004
Retail Price ¥1,200 (excl. tax)






In addition to this if old version of Ignite VSD harness is used, to install the current version of
Ignite VSD alpha 16V, a conversion harness CI005 (sold separately) is needed.

ci005

Part Number : CI005
Retail Price ¥1,200 (excl. tax)





If the Check Engine Light (CEL) is ON after installation due to issue with CAN communication regarding Ignition Coil/System,
CEL warning canceller will be needed for this situation.

dph19
CEL Warning Canceller Type 1
Part No.: DP019 ¥3,000 (excl. tax)






Ignite VSD alpha 16V is also applicable for Japan domestic and imported vehicles with in-line or V type 6 cylinders engines.
*2 modules of Ignite VSD alpha 16V is required for V8 engines.


To install Ignite VSD alpha 16V specific VSD harness is required for specific vehicle. Please kindly check the harness table for your vehicle model for the harness part number or provide us the vehicle details such as make, model, engine code, model year etc for further verifications.

PRECAUTIONS :
The following are the precautions needed. Please be sure to understand the product and instructions provided before proceeding further.
1) During installation, please be sure to avoid the harness from touching any hot or moving parts in the engine
  compartment.
2) Even the module housing is water resistant, please be sure to install it at a location where no direction contact with
  water as possible and the avoid the harness from facing upwards to prevent water from entering the connectors that
  may cause short circuit and damage the module.
3) When securing the module (using double sided tape), be sure to clean the surface of the module and also the surface
  where the module is decided to be secured from any oil or dirt. Failed to do so may cause the module to drop off from
  the place and might hit any moving parts of the engine.
4) Be sure to press the double sided tape firmly to the surface to avoid it from peeling off.
5) When connectiong or disconnecting the connectors, hold firmly at the connector housing to connect or disconnect it.
  DO NOT pull the wire side as this may cause possibility for the terminal contact to fail.
6) When connecting the connector, make sure a "click" sound is heard meaning it is connected firmly.
 Otherwise, vibration during the engine is operating and when the car is driving may cause the connector to detached
  from each other.


※The product is subject to change without any prior notice.
※We do not advise the product to be installed simultaneously with products from other companies.
※For warranty claim procedures, if found moisture contamination inside the circuit board of the module,
 it will be not covered under warranty.
  Therefore, please be careful of the location for the module during installation.
※When installing for a vehicle with 50,000KM and above for the mileage, we advise to replace a new set of
 ignition coils before proceeding.
※The failure of the ignition coil due to the installation of this product will not be covered any warranty.
※The data provided are subject to the test performed here in our region.
※It may vary depending on various conditions such as the vehicle's operating conditions.
※T.M.WORKS LTD does not guarantee that the exact performance shown can be achieved.


Copyright © T.M.WORKS, Ltd. All rights reserved.