トップイメージ
ProductsInternational DistributorSpecial DistributorRent CarJAPANESE
BuyCompany InfoContact usmotor sportsLinksCHINESE
alpha16v
T.M.WORKS IGNITE VSD ALPHA CI
イグナイトVSD alpha CI

専用ハーネスセット品番表
Ignite VSD alpha CI regulates and stabilizes the power supply to the ignition coils in the
same time reduce power loss of ignition current.
By pairing the Ignite VSD alpha CI with Ignite VSD alpha 16V, further engine performance
enhancement can be felt making then engine to perform more responsive from low-end
RPM to high-end RPM range.

Our Ignite VSD alpha CI is RoHS compliant. RoHS is also known as Directive 2002/95/EC, originated
in European Union and restricts the use of specific hazardous materials found in electrical and
electronic products. Therefore, it is suitable to be used in various countries around the world.


Benefits of Ignite VSD alpha CI :

1.Regulates and stabilizes power supply to ignition coil.
2.Decreases current consumption on battery or charging system.
3.Compliments and Improves VSD alpha 16V effects.
4.Maximizes the performance of VSD series.
6.Significantly reduce spiking load on the battery.
7.Protects ignition coil from input voltage sprkes (especially on continental cars)

                                        

 
Ignite alpha ci Ignite VSD alpha CI (current version)
Part Number : CI002
Retail Price : ¥15,000 (excl. tax)
Ignite VSD alpha CI is applicable for Japan domestic and
imported vehicles with in-line or V type 6 cylinders engines.








Ignite alpha ci Ignite VSD alpha CI (current version)
Part Number : CI002
Retail Price : ¥15,000 (excl. tax)
Ignite VSD alpha CI is applicable for Japan domestic and
imported vehicles with in-line or V type 6 cylinders engines.








*2 modules of Ignite VSD alpha 16V is required for V8 engines.

If the Check Engine Light (CEL) lit up, a canceller CI006 is required in this situation
when ONLY Ignite VSD alpha CI is installed.

ci006Check Light Canceller
Part Number : CI006
Retail Price : ¥1,800 (excl. tax)
The canceller is also use when CEL lit up when ONLY
Ignite VSD alpha CI is installed to hybrid model vehicles
or vehicles with start stop function or when situation such
as engine does not shut off even after ignition switch is
fully off or when there is abnormal during engine start up.




Comparison of power supply voltage changes of the ignition coil between a normal vehicle and a
vehicle installed with Ignite VSD alpha CI (optimum charging voltage)
 
  Power supply voltage changes of the ignition coil (in normal vehicle)       Power supply voltage changes of the ignition coil (in vehicle with Ignite VSD alpha CI) 


Use it together with Ignite VSD series product to experience an all round enhancement.

By installing Ignite VSD alpha CI in a vehicle that was already equipped with Ignite VSD alpha 16V,
we managed to enhance the response all the way from low RPM to high RPM range.
Comparison data between a vehicle installed ONLY with Ignite VSD alpha 16V and a vehicle installed with Ignite VSD alpha 16V + Ignite VSD alpha CI .


 
  Tested on Volkswagen Golf V R32


As shown in above comparison graphs, the input voltage fluctuates tremendously to the vehicle that
ONLY installed with Ignite VSD alpha 16V (left graph) and the fluctuation has been minimized to the
vehicle that installed both Ignite VSD alpha 16V and Ignite VSD alpha CI (right graph).
With the voltage fluctuations or sprkes significantly reduced, the full potential of the Ignite VSD alpha
16V can be provided. Besides that, the burden of the battery and the Ignite VSD alpha 16V burden
will also be reduced from the elimination of voltage fluctuations or sprkes.



*This product is not applicable for Mitsubishi GDI and diesel engines.
*The product is subject to change without any prior notice.
*We do not advise the product to be installed simultaneously with products from other companies.
*For warranty claim procedures, if found moisture contamination inside the circuit board of the module, it will be not covered under
 warranty. Therefore, please be careful of the location for the module during installation.
*When installing for a vehicle with 50,000KM and above for the mileage, we advise to replace a new set of ignition coils before
proceeding.
*The failure of the ignition coil due to the installation of this product will not be covered any warranty
*The data provided are subject to the test performed here in our region. It may vary depending on various conditions such as the
vehicle's operating conditions.
T.M.WORKS LTD does not guarantee that the exact performance shown can be achieved.


↑ページトップへ
Copyright © T.M.WORKS, Ltd. All rights reserved.